Back Panel Trim, Removing and Installing

Back Panel Trim, Removing And Installing

Special tools, testers and auxiliary items required







- Trim removal wedge VAS 3409







1 - Back panel trim
Removing
- Remove luggage compartment floor covering covering
- Remove lower rear shelf trim.
- Remove caps - 3 - of expanding clips - 2 - (7x).
- Remove expanding clips - 2 - (7x).
- Pull back panel trim - 1 - out from under frame of ski bag - 4 -.
- Removing back panel trim.
Installing
Install in reverse order of removal. Note following:
- Replace damaged expanding clips - 2 - and caps - 3 -.
- At start of assembly, clip back panel trim beneath frame of ski bag. To do so, make use of Trim removal wedge 3409 if necessary.
- Take care to avoid creases at back panel trim.
2 - Expanding clips
- Qty. 7
- Replace if damaged
3 - Cap
- Qty. 7
- For expanding clip - 2 -
- Replace if damaged
4 - Ski bag