Switch For 4-Way Lumbar Support, Removing and Installing

Switch For 4-way Lumbar Support, Removing And Installing

Removing
- Remove seat.
- Attach Fixture for seat repair VAS 6136 to Engine and transmission holder VAS 6095.
- Attach front seat to Fixture for seat repair VAS 6136.
- Remove seat side trim on sill panel side.
- Disconnect connector - 4 -.
- Remove bolts - 5 - (3x).
- Tightening torque 0.4 Nm







- Remove 4-way lumbar support switch - 3 -.

Installing
- Installation is reverse of removal.