LED Boards and Rear Taillamp Control Module, Removing and Installing

LED Boards And Rear Taillamp Control Module, Removing And Installing

NOTE: If LEDs are faulty, LED boards must be replaced together with control unit.







Removing

- Remove inner rear light.
- Press catches apart - arrows - and detach housing cover.
- Disconnect connector.







- Remove bolts - 1 through 3 - and remove LED boards with Taillamp Control Module.

Installing

Install in reverse order of removal, observing the following:
- Install inner rear light.

Tightening torque
LED boards and control module to rear light: 1 Nm