Ribbed Belt Drive For Power Steering Pump, Generator and Air Conditioning Component Overview
Ribbed Belt Drive for Power Steering Pump, Generator and Air Conditioning Component Overview
1 Ribbed belt
• Before removing, mark direction of rotation using chalk or felt-tip marker. Reversing direction of rotation of a run-in belt can destroy the belt
• Removing and installing => [ Ribbed Belt ] Ribbed Belt
• Check for wear
2 23 Nm
3 Generator
4 Cap for right idler roller
5 Right idler roller for ribbed belt
• Tighten to 32 Nm
6 23 Nm
7 Tensioning spring for tensioning roller
• With hydraulic damper
• Installation position: Inscription "TOP" faces upward
8 8 Nm
9 Belt pulley for coolant pump
10 10 Nm
11 Coolant pump
• Removing and installing => [ Coolant Pump ] Service and Repair
12 Cap for left idler roller
13 Left idler roller for ribbed belt
• Tighten to 32 Nm
14 Tensioning roller with relay lever
15 Alignment bushing
• 2 pieces
16 Bracket for air conditioning compressor
• Observe alignment sleeves => [ (Item 15) Alignment bushing ] when installing
• After replacing, check alignment of power steering pump pulley and air conditioning compressor pulley => [ Power Steering Pump Belt Pulley and Air Conditioning Compressor Belt Pulley, Checking Alignment ] Testing and Inspection
17 23 Nm
18 Fitting sleeves
• 2 pieces
19 A/C Compressor
• Observe alignment sleeves => [ (Item 18) Fitting sleeves ] when installing
20 Alignment bushing
• 2 pieces
21 Bracket for power steering pump
• Observe alignment sleeves => [ (Item 20) Alignment bushing ] when installing
• After replacing, check alignment of power steering pump pulley and air conditioning compressor pulley => [ Power Steering Pump Belt Pulley and Air Conditioning Compressor Belt Pulley, Checking Alignment ] Testing and Inspection
22 23 Nm
23 32 Nm
24 Power-steering pump
• After replacing, check alignment of power steering pump pulley and air conditioning compressor pulley => [ Power Steering Pump Belt Pulley and Air Conditioning Compressor Belt Pulley, Checking Alignment ] Testing and Inspection
25 Shim
• Different thicknesses
• After changing the power steering pump, the air conditioning compressor, the power steering pump bracket, the air conditioning compressor bracket or the upper section of the oil pan, check the alignment of the power steering pump and air conditioning compressor pulleys => [ Power Steering Pump Belt Pulley and Air Conditioning Compressor Belt Pulley, Checking Alignment ] Testing and Inspection
26 Belt pulley for power steering pump
27 23 Nm
28 23 Nm
29 23 Nm
30 32 Nm plus an additional 90° (1/4 turn)
• Replace
31 Vibration damper
• With belt pulley for ribbed belt
• Removing and installing => [ Vibration Damper ] Service and Repair
32 100 Nm plus an additional 90° (1/4 turn)
• Replace
• Use counter-holder (T10069) to loosen and tighten