Speed Sensor, Rear Axle

Speed Sensor, Rear Axle

Removing

- Raise vehicle.

- Separate speed sensor and speed sensor wiring connector - 1 -.





- Remove bolt - 2 - from wheel bearing housing.

- Remove ABS speed sensor from wheel bearing housing.

Installing

- Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with Polycarbamide grease (G 000 650)

- Insert speed sensor into hole in wheel bearing housing and tighten bolt together with retainer for speed sensor harness to 10 Nm.

- Connect speed sensor to speed sensor wiring.