Window Regulator Switch Strip (Rear Door Trim)

Rear Door Trim

Window Regulator Switch Strip

Removing

- Remove door trim => [ Rear Door Trim ]. Rear Door Trim

- Remove insulation => [ Insulation ]. Insulation

- Remove armrest => [ Rear Door Armrest ]. Rear Door Armrest

- Remove bolts - 5 - (Qty. 2).





• Tightening torque: 2 Nm.

- Remove screw - 4 -.

• Tightening torque: 2 Nm.

- Pull out front part - 3 - of armrest - 1 - from guide - 2 -.

- Slide down cover - 6 - toward rear.

- Disconnect harness connector on inside of front part - arrow -.

Installing

- Install window regulator switch strip in reverse order of removal.