Ribbed Belt Pulley, With Freewheel

Ribbed Belt Pulley, with Freewheel

Special tools, testers and auxiliary items required

• Multi-Tooth Adapter (3400)

• 8 mm Hex Socket or T50 TORX

Removing





- Remove the generator.

- If present, press the protective cap off the pulley.

- Counter hold the pulley using the (3400) and rotate the generator shaft clockwise to loosen it.

Installing

Install in reverse order of removal, observing the following:

- Turn the generator shaft counterclockwise to tighten.

- Clip the protective cap onto generator pulley.

Tightening Specifications