Driver-Side Electronics Box, Removing and Installing

Driver-side Electronics Box, Removing And Installing

- Component location: On vehicle floor beneath drivers seat.

Removing

- Remove drivers seat.
- Switch off ignition and remove ignition key.
- Remove lower A-pillar trim.
- Fold back floor carpet.







- Release cover for drivers side electronics box - arrows - and fold to side.







- Remove control modules - 1 - out of drivers side electronics box - 2 -.
- Remove electronics box.

NOTE: Check the exact assignment for driver side electronics box in the current wiring diagram.

Installing

Install in reverse order of removal, observing the following:
- Install lower A-pillar trim.
- Install drivers seat.