Diagram 47/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data Bus On Board Diagnostic Interface, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Overview Of Relay

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

SB6 - Fuse 6 (on fuse panel B) Overview Of Fuses

SB8 - Fuse 8 (on fuse panel B) Overview Of Fuses

SB10 - Fuse 10 (on fuse panel B) Overview Of Fuses

SB11 - Fuse 11 (on fuse panel B) Overview Of Fuses

SD1 - Fuse 1 (on fuse panel D) Overview Of Fuses

T16 - 16-Pin Connector, Diagnostic Connector Overview Of Control Modules

T20 - 20-Pin Connector, black, on data bus on board diagnostic interface

T26b - 26-Pin Connector, black, on data bus on board diagnostic interface

(374) - Ground Connection 9 (in main wiring harness)

(664) - Ground Connection (behind instrument panel, left) Ground Locations

(B272) - Plus Connection (30) (in main wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

(B325) - Plus Connection 11 (30a) (in main wiring harness)

• - CAN-Bus (data wire)

* - Relay and fuse carrier below driver's seat

♦ - Through May 2007

♦♦ - from June 2007

# - Through May 2008

## - from June 2008

Next Diagram 47/3 (Tracks 15-28)