Subframe, Stabilizer Bar, Connecting Link, Assembly Overview

Subframe, stabilizer bar, connecting link, assembly overview





1 - Front final drive

2 - Subframe,

3 - Self-locking nut
^ Always replace after removal

4 - Bolt 90 Nm plus an additional 1/4 turn (90°)
^ Always replace after removal

5 - Bolt 90 Nm plus an additional 1/4 turn (90°)
^ Always replace after removal

6 - Bolt 120 Nm plus an additional 1/4 turn (180°)
^ Always replace after removal

7 - Self-locking nut
^ 180 Nm
^ Always replace after removal

8 - Eccentric washer

9 - Eccentric bolt

10 - Lower control arm
^ Conical pin must be free of grease and oil
^ If necessary, clean using dry rag, do not use cleaning agents

11 - Bolt
^ 120 Nm plus an additional 1/4 turn (180°)
^ Always replace after removal

12 - Coupling rod

13 - Bolt

14 - Suspension strut

15 - Self-locking nut
^ 110 Nm
^ Always replace after removal

16 - Bolt

17 - Clamp

18 - Bolt
^ 60 Nm

19 - Stabilizer bar mount
^ Note stabilizer bar mount location

20 - Self-locking nut
^ 110 Nm
^ Always replace after removal

21 - Stabilizer bar