Driver Seat Assembly Overview

Driver Seat Assembly Overview

• When installing driver's seat, follow screw installation sequence.

- Position screws - 2 - in sequence - A -, - B -, - C - and - D - and tighten to the specification in same sequence.






1 Seat rail cover

• Removing and Installing, refer to => [ Seat Rail Covers ] Seat Rail Covers

2 Screw, self-locking

• 45 Nm

• Always replace if removed

• Clean nut threads before installing new screws

• Observe installation sequence

3 Driver seat

• Removing and Installing, refer to => [ Front Seat ] Front Seat

4 Seat rail cover

• Removing and Installing, refer to => [ Seat Rail Covers ] Seat Rail Covers

5 Seat rail cover

• Removing and Installing, refer to => [ Seat Rail Covers ] Seat Rail Covers

6 Backrest adjusting wheel

• Removing and Installing, refer to => [ Backrest Adjusting Wheel ] Backrest Adjusting Wheel

7 Seat height adjustment handle

• Removing and Installing, refer to => [ Seat Height Adjustment Handle ] Seat Height Adjustment Handle

8 Driver seat console

9 Seat rail cover

• Removing and Installing, refer to => [ Seat Rail Covers ] Seat Rail Covers

10 Trim

• Sill side

• Removing and Installing, refer to => [ Sill Side Trim ] Sill Side Trim

11 Handle

• For seat forward/back adjustment

• Removing and Installing, refer to => [ Seat Forward/Back Adjustment Handle, Removing and Installing ] Seat Forward/Back Adjustment Handle, Removing and Installing