2nd Row, 2 Seater Overview

2nd Row, 2 Seater Overview


Observe the assembly sequence of the screw connection when installing the 2nd row.






1 Right Individual Seat

• Removing and installing, refer to => [ Individual Seat ] Individual Seat.

• Seat rail overview, refer to => [ Seat Rail Overview ] Seat Rail Overview.

• Seat rail, removing and installing, refer to => [ Seat Rail ] Seat Rail.

2 LATCH Caps

• Clipped onto seat frame bracket.

• Removing and installing, refer to => [ LATCH Cap ] LATCH Cap.

3 Screw, Self-Locking

• Always replace if removed.

• Clean nut threads before installing new screws.

• Pay attention to the assembly sequence and tightening torque.

4 Rear Seat Rail Cap

• Removing and installing, refer to => [ Rear Seat Rail Cap ] Rear Seat Rail Cap.

5 Rear Seat Rail Cap

• Removing and installing, refer to => [ Rear Seat Rail Cap ] Rear Seat Rail Cap.

6 Entry Assistance Trim

• Removing and installing, refer to => [ Entry Assistance, Trim ] Entry Assistance, Trim.

7 Entry Assistance Handle

• Removing and installing, refer to => [ Entry Assistance, Handle ] Entry Assistance, Handle.

8 Trim

• Left side, outer part.

• Removing and installing, refer to => [ Left Side Trim Panel, Outer Part ] Left Side Trim Panel, Outer Part.

9 Trim

• Left side, inner part

• Removing and installing, refer to => [ Left Side Trim Panel, Inner Part ] Left Side Trim Panel, Inner Part.

10 Left Individual Seat

• Removing and installing, refer to => [ Individual Seat ] Individual Seat.

• Seat rail overview, refer to => [ Seat Rail Overview ] Seat Rail Overview.

• Seat rail, removing and installing, refer to => [ Seat Rail ] Seat Rail.

11 Handle

• Seat, folding

• To remove damaged handle, remove outer part of left side trim panel and drive handle off lever.

12 Left Console

13 Left Mounting Piece

14 Right Mounting Piece

15 Front Seat Rail Cap

• Placed on seat rail.

16 Front Seat Rail Cap

• Placed on seat rail.

17 Screw, Self-Locking

• Always replace if removed.

• Clean nut threads before installing new screws.

• Pay attention to the assembly sequence and tightening torque.

18 Seat Rail Cover

• Clipped into the inner part (floor covering component).

• Removing and installing, refer to => [ Seat Rail Cover ] Seat Rail Cover.

19 Right Console



Assembly Sequence and Tightening Torque

- Insert screws - 1 - and tighten to 50 Nm.






- Insert screws - 2 - but do not tighten.

- Insert screws - 4 - and tighten to 50 Nm.

- Insert screws - 3 - and tighten to 50 Nm.

- Tighten screws - 2 - to 50 Nm.