Diagram 12/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ABS Control Module, Clutch Pedal Switch, ABS Inlet Valve, ABS Outlet Valve, Driving Dynamics Regulation Switch Valve, Driving Dynamics Regulation High Pressure Switch Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F36 - Clutch Pedal Switch

J104 - ABS Control Module Antilock Brake System Component Overview

J623 - Engine Control Module (ECM) Overview Of Control Modules

N99 - Right Front ABS Inlet Valve

N100 - Right Front ABS Outlet Valve

N101 - Left Front ABS Inlet Valve

N102 - Left Front ABS Outlet Valve

N133 - Right Rear ABS Inlet Valve

N134 - Left Rear ABS Inlet Valve

N135 - Right Rear ABS Outlet Valve

N136 - Left Rear ABS Outlet Valve

N225 - Driving Dynamics Regulation Switch Valve 1

N226 - Driving Dynamics Regulation Switch Valve 2

N227 - Driving Dynamics Regulation High Pressure Switch Valve 1

N228 - Driving Dynamics Regulation High Pressure Switch Valve 2

S7 - Fuse (on fuse/relay panel) Locations

T10c - 10-Pin Connector, pink, connector station electronics box plenum chamber

T47a - 47-Pin Connector, on ABS control module

* - Only manual transmission

** - => Wiring Diagram engine

# - Not applicable, phased-in

Previous Diagram 12/7 (Tracks 71-84)