Diagram 19/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Lane Change Assistance Control Module, Fuse





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Overview Of Relay

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

J769 - Lane Change Assistance Control Module Overview Of Control Modules

SC4 - Fuse 4 (on fuse panel C) Locations

SC6 - Fuse 6 (on fuse panel C) Locations

T12l - 12-Pin Connector, black, on lane change assistance control module

T14d - 14-Pin Connector, brown, rear right bumper

T20 - 20-Pin Connector, black, on data bus on board diagnostic interface

T26b - 26-Pin Connector, black, on data bus on board diagnostic interface

(51) - Ground Connection (in luggage compartment, right) Ground Locations

(390) - Ground Connection 25 (in main wiring harness)

(470) - Ground Connection 1 (in rear bumper wiring harness)

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B163) - Plus Connection 1 (15) (in interior wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

(X171) - Connection (15) (in rear bumper wiring harness)

• - CAN-Bus (data wire)

* - Relay and fuse carrier below driver's seat

♦ - Through May 2007

♦♦ - from June 2007

# - Through May 2008

## - from June 2008

Next Diagram 19/3 (Tracks 15-28)