Oil Pump, Assembly Overview

Oil Pump, Assembly Overview






1 O-ring

• Replace

• Oil before assembling

2 Oil check valve

• Removing and installing => [ Oil Check Valve ] Service and Repair.

3 O-ring

• Replace

• Oil before assembling

4 Oil pump

• Removing and installing => [ Oil Pump ] Oil Pump.

5 Bolt

• Insert using locking compound; locking compound => Parts Catalog.

• 8 Nm

6 Bolt

• Use counter hold (T10069) on vibration damper to loosen and tighten

• Replace

• Tightening specifications => [ (Item 14) Bolt ] Camshaft Timing Chains, Assembly Overview

7 Camshaft timing chain sprocket

• Removing and installing => [ Timing Mechanism Drive Chain ] Timing Mechanism Drive Chain.

8 Timing mechanism drive chain sprocket

• Removing and installing => [ Timing Mechanism Drive Chain ] Timing Mechanism Drive Chain.

9 Oil spray jet

• Removing and installing => [ Oil Spray Jet, Removing and Installing ]

Oil Spray Jet, Removing and Installing





• Oil spray jets are built into the crankshaft bearings 2 to 7.

Removing

- Press oil spray jet out toward crankshaft bearing with 4 mm dia. drift.

Installing

- Press oil spray jet in by hand with 6 mm dia. drift - arrow -.