Headlamps

Headlamps

• Adjust the headlamps after performing any work that could have affected their adjustment => [ Headlamps, Adjusting ] Headlamps, Adjusting.

Removing






- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

- Disconnect electrical connector - 1 -.

- Release retaining clip - 2 - in - direction of arrow -.

- Press retaining clip - 3 - down, and at the same time, remove headlamp housing - 4 - from mount.

Installing






- Make sure the guides on the headlamp housing engage into the guides on the mount - arrows - when installing the headlamp - 1 - into the mount - 2 -.

• The headlamp housing must slide into the mount gently without using force.

- Slide headlamp into mount until it engages audibly.

- Secure headlamp with retaining clip.

- Adjust headlamps after installing, refer to => [ Headlamps, Adjusting ] Headlamps, Adjusting.