Tail Lamps and Bulb Holders

Tail Lamps and Bulb Holders

Removing






- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

- Press cover cap - 1 - on outer side - arrow - inward.

- Allow cover cap to hang.

- Remove screw - 3 - with a screwdriver - 1 -.






- Remove the tail lamp - 2 - from the bumper cover.

- Disconnect electrical connector on central connector.

Installing

Install in reverse order of removal, observing the following:

- Tighten screw.

- Press cover cap into bumper cover until it engages audibly.

Tightening Specifications