Front Axle Caster, Adjusting

Front Axle Caster, Adjusting

Special tools, testers and auxiliary items required

• Socket Wrench 21 mm (T10188)

- Remove connector nut - 1 - and install new nut as far as stop.






- Adjust caster by rotating eccentric bolt.

• The maximum adjustment range is 90° to left or right of center position.

- Tighten nut - 1 - with Socket (T10188) - item 12 - => [ (Item 12) Self-Locking Nut ] Front Axle Overview.

- After nut - 1 - has been tightened, check caster value again.