Diagram 42/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Position (TP) Sensor, Mass Air Flow (MAF) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F194 - Clutch Pedal Starter Interlock Switch

G42 - Intake Air Temperature (IAT) Sensor Locations

G70 - Mass Air Flow (MAF) Sensor Locations

G79 - Throttle Position (TP) Sensor Locations

G185 - Accelerator Pedal Position Sensor 2 Locations

J217 - Transmission Control Module (TCM) Overview Of Control Modules

J518 - Access/Start Control Module Access/Start Authorization System Component Overview

J623 - Engine Control Module (ECM) Overview Of Control Modules

J843 - Models Location System Control Module Interface Locations

T10c - 10-Pin Connector, pink, connector station electronics box plenum chamber

T10e - 10-Pin Connector, green, connector station electronics box plenum chamber

T12z - 12-Pin Connector, brown, on models location system control module interface

T16g - 16-Pin Connector, black, on transmission control module (TCM)

T20e - 20-Pin Connector, black, on access/start control module

T94 - 94-Pin Connector, black, on engine control module (ECM)

(44) - Ground Connection (on left lower A-pillar) Ground Locations

(372) - Ground Connection 7 (in main wiring harness)

(B482) - Connection 18 (in main wiring harness)

(B564) - Connection 31 (in main wiring harness)

* - Models with manual transmission

** - Models with automatic transmission 0AT

*** - Models with special functions interface

# - Through May 2006

## - from June 2006

### - from June 2008

Previous Diagram 42/11 (Tracks 127-140)

Next Diagram 42/13 (Tracks 155-168)