Diagram 42/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC), Clutch Pedal Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F36 - Clutch Pedal Switch

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G131 - Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations

J104 - ABS Control Module Antilock Brake System Component Overview

J623 - Engine Control Module (ECM) Overview Of Control Modules

S15 - Fuse (on fuse/relay panel) Locations

T4r - 4-Pin Connector, black, oxygen sensor (O2S) behind three way catalytic converter (TWC)

T4s - 4-Pin Connector, brown, oxygen sensor (O2S) 2 behind three way catalytic converter (TWC)

T10c - 10-Pin Connector, pink, connector station electronics box plenum chamber

T47a - 47-Pin Connector, on ABS control module

T94 - 94-Pin Connector, black, on engine control module (ECM)

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)

Z30 - Oxygen Sensor (O2S) Heater 2 (behind Three Way Catalytic Converter (TWC)

(D107) - Connection 5 (in engine compartment wiring harness)

* - Models with manual transmission

** - Phased-in modification

Previous Diagram 42/13 (Tracks 155-168)

Next Diagram 42/15 (Tracks 183-196)