Diagram 42/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Cylinder 1 - 3 Fuel Injector, Ignition Coil 1 - 3 with Power Output Stage





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J623 - Engine Control Module (ECM) Overview Of Control Modules

N30 - Cylinder 1 Fuel Injector Locations

N31 - Cylinder 2 Fuel Injector Locations

N32 - Cylinder 3 Fuel Injector Locations

N70 - Ignition Coil 1 with Power Output Stage Locations

N127 - Ignition Coil 2 with Power Output Stage Locations

N291 - Ignition Coil 3 with Power Output Stage Locations

P - Spark Plug Connectors

Q - Spark Plugs

S7 - Fuse (on fuse/relay panel) Locations

T6m - 6-Pin Connector, white, connector station electronics box plenum chamber

T60 - 60-Pin Connector, black, on engine control module (ECM)

(17) - Ground Connection (on intake manifold)

(281) - Ground Connection 1 (in engine pre-wiring wiring harness)

(283) - Ground Connection 2 (in engine pre-wiring wiring harness)

(458) - Ground Connection 3 (in engine pre-wiring wiring harness)

(609) - Ground Connection (in plenum chamber, right) Ground Locations

(D115) - Connection 13 (in engine compartment wiring harness)

# - Through May 2006

## - from June 2006

Previous Diagram 42/5 (Tracks 43-56)

Next Diagram 42/7 (Tracks 71-84)