Washer Fluid Reservoir

Washer Fluid Reservoir

Removing

- Switch off ignition and remove ignition key.

- Remove right front wheel.

- Remove front right wheel housing liner..

- Remove filler tube filler hose - 1 - from washer fluid reservoir.






- Disconnect electrical connector - 3 - on central connector.

- Release catch and remove central connector - 2 - from bracket.

Vehicles With Headlamp Washer System:

- Disconnect hose coupling - 4 - by pressing release button.

All Vehicles






- On vehicles with Tire Pressure Monitoring System, disengage electrical wiring harness from retainers - 1 - and - 3 - on washer fluid reservoir.

- Place a drip tray under the windshield washer fluid reservoir.

- Remove the bolts - 2 - and - 4 -.

- Identify washer fluid lines - 1 - and - 3 - for installing on the windshield washer fluid pump - 2 - later.






- Remove washer fluid lines on washer fluid pump.

- Remove washer fluid reservoir downward.

Installing

Install in reverse order of removal, observing the following:

- When attaching water hose, make sure it engages audibly in connection of washer fluid pump.

- Slide filler tube filler hose into washer fluid reservoir.

• Be careful not to crimp the to-ring when installing it.

- Install the right front wheel housing liner..

Tightening Specifications