Instrument Panel Components Overview
Instrument Panel Components Overview
1 Parking Brake Release Handle
2 Light Switch
• Removing and installing
3 Left Side Instrument Panel Vent
• Removing and installing, refer to => [ Side Panel Vent ] Side Panel Vent.
4 Bolt
• Tightening specification - 1.4 Nm
5 Side Instrument Panel Cover
• Removing and installing, refer to => [ Panel Side Cover ] Panel Side Cover.
6 Bolt
• Tightening specification - 1.4 Nm
7 Guide
• For parking brake release handle.
8 Bolt
• Tightening specification - 1.4 Nm
9 Bolt
• Tightening specification - 0.6 Nm
10 Bolt
• Tightening specification - 0.6 Nm
11 Upper Center Air Duct
• Depending on equipment with Indirect Ventilation Flap Motor (V213).
12 Center Air Duct
13 Installation Frame
• For the center instrument panel vent, CD changer (R41) , Climatronic control module (J255) (also called A/C control head).
• Removing and installing, refer to => [ Installation Frame ] Installation Frame.
14 Clips
15 Clips
16 Bolt
• Tightening specification - 1.4 Nm
17 Sunlight Photo Sensor (G107)
18 Indirect Ventilation Trim
• With defroster vent.
• Removing and installing, refer to => [ Indirect Ventilation Trim ] Indirect Ventilation Trim.
19 Spreader Pin
20 Bolt
• Tightening specification - 1.8 Nm
21 Speaker
22 Threaded Clip
23 Instrument Panel
• Follow all safety precautions when working on pyrotechnic components.
• Follow the allocation of the airbag unit to the instrument panel. Refer to Electronic Parts Catalog (ETKA).
• Removing and installing, refer to => [ Instrument Panel ] Instrument Panel.
24 Right Side Instrument Panel Vent
• Removing and installing, refer to => [ Side Panel Vent ] Side Panel Vent.
25 Front Passenger Airbag Unit Bracket
26 Front Passenger Airbag Unit
• Follow all safety precautions when working on pyrotechnic components.
• Follow the allocation of the airbag unit to the instrument panel. Refer to Electronic Parts Catalog (ETKA).
• Removing and installing, refer to => [ Front Passenger Airbag Unit ] Front Passenger Airbag Unit.
27 Nut
• Replace
• Tightening specification - 7 Nm
28 Trim
• For Access/Start Authorization Switch (E415).
29 Center Instrument Panel Vent
• Removing and installing, refer to => [ Center Instrument Panel Vent ] Center Instrument Panel Vent.
• With the switch unit with the Front passenger airbag -disabled- indicator lamp (K145).
• The switch strip inside the center instrument panel vent must be replaced completely if the Front passenger airbag disabled indicator lamp (K145) LED is faulty.
30 CD Changer (R41)
31 Climatronic Control Module (J255)
32 Access/Start Authorization Switch (E415)
33 Bolt
• Tightening specification - 1.4 Nm
34 Gap Cover
35 Bolt
• Tightening specification - 1.4 Nm
36 Instrument Cluster