2nd Row, 2-Seater Assembly Overview
2nd Row, 2-Seater Assembly Overview
Observe the assembly sequence of the screw connection when installing the 2nd row.
1 Right individual seat
• Removing and Installing, refer to => [ Individual Seat, 2nd Row ] Individual Seat, 2nd Row
• Seat Rail Assembly Overview, refer to => [ Seat Rail Assembly Overview ] Seat Rail Assembly Overview
• Seat Rail, Removing and Installing, refer to => [ Seat Rail ] Seat Rail
2 LATCH caps
• clipped onto seat frame bracket
• Removing and Installing, refer to => [ LATCH Cap ] LATCH Cap
3 Screw, self-locking
• Always replace if removed
• Clean nut threads before installing new screws
• Pay attention to the assembly sequence and tightening torque
4 rear seat rail cap
• Removing and Installing, refer to => [ Rear Seat Rail Cap ] Rear Seat Rail Cap
5 rear seat rail cap
• Removing and Installing, refer to => [ Rear Seat Rail Cap ] Rear Seat Rail Cap
6 Trim (entry assistance)
• Removing and installing => [ Entry Assistance Trim ] Entry Assistance Trim
7 Handle (entry assistance)
• Removing and installing => [ Entry Assistance Handle ] Entry Assistance Handle
8 Trim
• Left side, outer part
• Removing and Installing, refer to => [ Left Side Trim Panel, Outer Part ] Left Side Trim Panel, Outer Part
9 Trim
• Left side, inner part
• Removing and Installing, refer to => [ Left Side Trim Panel, Inner Part ] Left Side Trim Panel, Inner Part
10 Left individual seat
• Removing and Installing, refer to => [ Individual Seat, 2nd Row ] Individual Seat, 2nd Row
• Seat Rail Assembly Overview, refer to => [ Seat Rail Assembly Overview ] Seat Rail Assembly Overview
• Seat Rail, Removing and Installing, refer to => [ Seat Rail ] Seat Rail
11 Handle
• Seat, folding
• To remove damaged handle, remove outer part of left side trim panel and drive handle off lever.
12 Left console
13 Left mounting piece
14 Right mounting piece
15 Front seat rail cap
• Placed on seat rail
16 Front seat rail cap
• Placed on seat rail
17 Screw, self-locking
• Always replace if removed
• Clean nut threads before installing new screws
• Pay attention to the assembly sequence and tightening torque
18 Seat rail cover
• Clipped into the inner part (floor covering component)
• Removing and Installing, refer to => [ Seat Rail Cover ] Seat Rail Cover
19 Right console
Assembly Sequence and Tightening Specification:
- Insert screws - 1 - and tighten to "50 Nm".
- Insert screws - 2 - "but do not tighten".
- Insert screws - 4 - and tighten to "50 Nm".
- Insert screws - 3 - and tighten to "50 Nm".
- Slide the seat all the way to the front in order to tighten the bolts - 2 - to "50 Nm".