Seat Pan Assembly Overview

Seat Pan Assembly Overview

• The upper and lower seat pan frames of the front seat can be separated and replaced individually.

• When removing the seat pan, make sure the bushings in the bearing points (upper and lower frame threaded connection) are not damaged. These bushing cannot be replaced with workshop materials.






1 Screw, self-locking

• 28 Nm

• Quantity: 3

• Replacing

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

2 Upper seat pan frame

• Removing and Installing, refer to => [ Seat Pan, Disassembling and Assembling ] Seat Pan, Disassembling and Assembling

3 Bushing

• Inserted in all bracket locations

• Cannot be replaced with workshop materials

• If the bushings are damaged, assembly part must be replaced, allocation => Parts Catalog

4 Lower seat pan frame

• Removing and Installing, refer to => [ Seat Pan, Disassembling and Assembling ] Seat Pan, Disassembling and Assembling

5 Bolt

• 28 Nm

• Replacing

6 Nut

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

7 Driver Seat Height Adjustment Motor (V245) or Front Passenger's Seat Height Adjustment Motor (V246)

• Removing and Installing, refer to => [ Seat Height Adjustment Motor V245/V246 ] Seat Height Adjustment Motor V245/V246

8 Seat forward/back adjustment motor (V288)

• Cannot be removed and installed with workshop materials

• Stays on the lower seat pan frame => [ (Item 4) Lower seat pan frame ]

9 Driver seat angle adjustment motor (V243) or front passenger seat angle adjustment motor (V244)

• Removing and Installing, refer to => [ Driver Seat Angle Adjustment Motor V243 or V244 ] Driver Seat Angle Adjustment Motor V243 or V244

10 Screw, self-locking

• 20 Nm

• Replacing

• Threaded holes for screws must always be cleaned (for example, with thread cutter)