Backrest Overview, Right and Left
Backrest Overview, Right and Left
• For illustrative purposes, only the right backrest is shown. Follow screw installation sequence (A, B, C, D)!
1 Backrest
• Removing and installing, refer to => [ Backrest, Right or Left ] Backrest, Right or Left.
2 Screw, Self-Locking
• 40 Nm
• Always replace if removed.
• Clean threaded hole.
• Observe installation sequence.
3 Screw, Self-Locking
• 20 Nm
• Always replace if removed.
• Clean threaded hole.
• Observe installation sequence.
4 Bearing Disc
5 Control Disc
• Note location
6 Bearing Sleeve
• Note location
7 Screw, Self-Locking
• 75 Nm
• Always replace if removed.
• Clean threaded hole.
• Observe installation sequence.
8 Screw, Self-Locking
• 75 Nm
• Always replace if removed.
• Clean threaded hole.
• Observe installation sequence.