Passenger Seat Console

Passenger Seat Console

Removing


Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components General Safety Precautions ] .

- Remove the front seat.

• Manual seat, refer to => [ Driver Seat Overview ] Driver Seat Overview.

• Memory seat, power seat and Comfort seat, refer to => [ Driver Seat Overview ] Driver Seat Overview.

- Remove front console trim. Refer to => [ Front Console Trim, Front Passenger Seat ] Front Console Trim, Front Passenger Seat.

- Remove right console trim. Refer to => [ Right Console Trim, Front Passenger Seat ] Right Console Trim, Front Passenger Seat.

- Remove the drawer. Refer to => [ Drawer ] Drawer.

- Remove the bolts - 1 -.






- Remove console - 2 -.

Installing


Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components General Safety Precautions ] .

Install in reverse order of removal. Note the following:

• The screws are micro-encapsulated and must be replaced after each loosening.

• Before installing the new screws, the threads of the corresponding nuts must be cleaned.

- Position console - 2 -.






- Attach screws - 1 - in sequence - A -, - B -, - C - and - D -.

- Tighten screws - 1 - in sequence - A -, - B -, - C - and - D - to the specification in => [ Front Passenger Seat with Drawer, Bracket Overview ] Front Passenger Seat with Drawer, Bracket Overview.