Right Side Trim Panel

Right Side Trim Panel

Removing






- Remove the 2nd row seat bench. Refer to => [ 2nd Row, 3-Seater Assembly Overview ] 2nd Row, 3-Seater Assembly Overview.

- First press trim panel - A - in front area (clip) - arrow 1 - with a screwdriver.

- Then turn trim panel in rear area toward outside - arrow 2 - and at the same time, pry trim panel out with a screwdriver in lower area (clip) - arrow 3 -.

- Then press trim out of upper catch - arrow 4 - and slide it in - direction of arrow 5 - off backrest.

Installation

Install in reverse order of removal.

- Replace damaged clips.