Sill Side Trim

Sill Side Trim

Removing

- Bring left seat into service position. Refer to => [ Driver Seat, Bringing Into Service Position ] Driver Seat, Bringing Into Service Position.

- Switch off the ignition.

- Remove backrest adjustment wheel. Refer to => [ Backrest Adjusting Wheel ] Backrest Adjusting Wheel.

- Remove seat height adjustment handle. Refer to => [ Seat Height Adjustment Handle ] Seat Height Adjustment Handle.

- Disengage fastening strip - 1 - on footwell cover - 2 - from brackets - 4 - (quantity: 2) on trim - 3 -.






- Remove expanding rivets - 4 - (quantity: 2).






1. Retaining strip

2. Footwell cover

3. Trim


- Press tabs - 1 - (quantity: 4) down in - direction of arrow - and unclip trim - 2 - in front area.






- Disengage trim in area of backrest adjustment wheel and seat anchor.

- Remove trim forward.

Installation

Install in reverse order of removal.

For the correct tightening specifications, refer to => [ Driver Seat Bracket Assembly Overview ] Driver Seat Bracket Assembly Overview