Diagram 1/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Rain/Light Recognition Sensor, Wiper Motor Control Module, Windshield Wiper Motor, Rear Window Wiper Motor, Windshield and Rear Window Washer Pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G397 - Rain/Light Recognition Sensor

J400 - Wiper Motor Control Module

S30 - Rear Window Wiper Fuse Overview Of Fuses

SB4 - Fuse 4 (on fuse panel B) Overview Of Fuses

SC1 - Fuse 1 (on fuse panel C) Locations

T6d - 6-Pin Connector, black, in front right engine compartment

T10r - 10-Pin Connector, red, rear lid coupling

V - Windshield Wiper Motor

V12 - Rear Window Wiper Motor

V59 - Windshield and Rear Window Washer Pump

(44) - Ground Connection (on left lower A-pillar) Ground Locations

(372) - Ground Connection 7 (in main wiring harness)

(608) - Ground Connection (in center plenum chamber) Ground Locations

(668) - Ground Connection 2 (on left D-pillar) Ground Locations

(B298) - Plus Connection 2 (30) (in main wiring harness)

(B471) - Connection 7 (in main wiring harness)

(B484) - Connection 20 (in main wiring harness)

(B486) - Connection 22 (in main wiring harness)

* - Relay and fuse carrier instrument panel, center

♦ - Through May 2007

♦♦ - from June 2007

Previous Diagram 1/15 (Tracks 183-196)

Next Diagram 1/17 (Tracks 211-224)