Diagram 1/31 (Tracks 407-420)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Overview Of Control Modules

J523 - Front Information Display Control Head Control Module Component Locations

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

T26b - 26-Pin Connector, black, on data bus on board diagnostic interface

T32a - 32-Pin Connector, grey, on instrument cluster control module

T46a - 46-Pin Connector, black, left CAN separating connector

Y24 - Display Unit in Instrument Cluster

(378) - Ground Connection 13 (in main wiring harness)

(B325) - Plus Connection 11 (30a) (in main wiring harness)

• - CAN-Bus (data wire)

* - Wake Up Wire

** - Not applicable, phased-in

# - from June 2006

♦ - FOC - Fibre Optic Conductor => Wiring Diagram Infotainment-Data Bus (Most-Ring)

Previous Diagram 1/30 (Tracks 393-406)

Next Diagram 1/32 (Tracks 421-434)