Procedures

Engine, Securing to Engine and Transmission Holder

Special tools, testers and auxiliary items required

• Lifting Tackle (3033)

• Engine and Transmission Holder (VAS 6095) with V8 FSI Engine Holder (6095/1-6A)

• Shop Crane (VAS 6100)

• Lift Arm Extension for Workshop Crane (VAS 6101)

• Scissor Lift Table (VAS 6131)

• Joint Support (VAS 6131/13-7)

Procedure

• Engine/transmission assembly removed and separated on (VAS 6131). Refer to => [ Engine and Transmission, Separating ] Engine and Transmission, Separating.

• Engine secured with (VAS 6131/13-7).

• Place a rag under separating point to catch escaping hydraulic fluid.

- Remove power steering pressure line banjo fitting - arrow -.





- Remove engine bracket bolts at left and right - arrows -.





• Engine carrier remains in installation location.

- Engage (3033) on engine lifting eyes and on (VAS 6100) with (VAS 6101) as shown in the illustration.





- Tension engine slightly with workshop crane, do not lift.

- Remove (VAS 6131/13-7) from engine.





- Raise engine from engine carrier.

- Remove bolts at left and right - arrows - and remove engine support.





• The illustration shows the left engine support.

- Secure the engine on the (VAS 6095) with the (6095/1-6A) as illustrated.