Front Suspension

Longitudinal Member Threads, Repairing

Damaged threads can be repaired with wire inserts (Helicoil).

Refer to the assembly overviews to see which threads can be repaired.

Shavings that remain in the body must be imbedded in wax.

It is possible to service the threads of the weld nuts in the longitudinal member depending on certain conditions.

• Servicing work may only be performed once per thread.

• If servicing is necessary after this, the nuts must be replaced.

Wear protective goggles when drilling.

• Have the thread repair checked by the responsible foreman or next person in charge.

• Thread insert must be the same length as thread in body.

• Correct any damage to the underbody sealant layer.