Instruments - Incorrect Displays With Navigation ON

90 Instrument cluster center display symbols are incorrect when navigation is switched on

90 10 09

2022692/2

July 7, 2010

Supersedes Technical Service Bulletin Group 90 number 10-04 dated April 1, 2010 for reasons listed below.





Affected Vehicles





Condition

When the navigation system is switched on, the instrument cluster center display may show the adaptive cruise control braking guard distance warning symbol instead of the navigation menu.

Technical Background

Instrument cluster software compatibility issue between the navigation system and adaptive cruise control (ACC).

Production Solution

New software in the instrument cluster (J285) addressed the condition.

Service

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the instrument cluster (J285) using the SVM action code as listed in the table below if necessary.

3. If flash process stops partway or does not finish, repeat SVM flash. If flash cannot be completed, please call the Audi Technical Assistance Center (TAC).

4. Check the date and time. The flash process may change the date and time in the instrument cluster. If necessary, reset the date and time.





Tip: The SVM process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.





Warranty

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.


























Attachments - 00 Software Version Management (SVM), operating instructions