Cleaning and Lubrication of the Sides of the Front Sunroof Panel

Cleaning and lubrication of the slides of the front sunroof panel:





1. Clean the slides with a lint-free cloth. Apply lubricant G 060 751 A2 to the slides with a brush to both slides.

Cleaning and lubrication of the seals:





1. Clean all the seals with isopropanol and a lint-free cloth.








2. Lubricate all the seals with special lubricating paste G 052 141 A2 using a brush.

Tip: No parts have to be removed. It is only necessary to completely open the sunroof panel.





3. Another source of noise can come from the sunroof panel trim. Make certain that all of the sunroof trim is intact and correctly installed.





4. Incorrectly installed, or incorrectly adjusted sunroof panels, cause tension and are another source of noise. Check and adjust as necessary using ElsaWeb or refer to TSB 2018898.

5. A loose wind deflector mounting can be a source of noise as well. Refer to TSB 2012804.

A6/A8:





1. Lubricate the seals with special lubricating paste G 052 141 A2.

Tip: No parts have to be removed. It is only necessary to completely open the sunroof panel.





2. Lubricate the mechanism components with lubricating paste G 060 751 A2.

3. After application of the appropriate lubricant to the indicated areas is complete, open and close the sunroof completely 2 to 3 times to adequately distribute the lubricant.