Safety Precautions

Safety Precautions

If testing equipment must be used during a road test, observe the following:

Distraction and testing equipment that is not secured properly can cause accidents.

The passenger airbag could pose a risk if it deploys in a collision.

• Operating testing equipment while driving causes it to shift position.

• There is an increased risk of injury due to unsecured testing equipment.

• Always secure testing equipment on the rear seat using a strap and have a second person in the rear seat operate it.

Observe the following to avoid personal injury and vehicle damage:

There is a risk of injury and accident from accidentally engaging a gear when the engine is running.

• Before performing work with the engine running, place the selector lever in the "P" position and set the parking brake.

Observe the following to prevent personal injury and/or damage to the electrical/electronic components:

• Connect and disconnect test equipment only when the ignition is turned off.

Danger of causing damage to electrical and electronic components.

• Be sure to follow the procedure for connecting the battery and afterwards.