Windshield and Rear Window Washer Pump

Windshield and Rear Window Washer Pump

Special tools, testers and auxiliary items required

• Drip Tray

Removing






- Switch off ignition and remove ignition key.

- Remove right front wheel.

- Remove front right wheel housing liner..

- Disconnect the connector - 2 - on the Windshield washer fluid level sensor (G33).

- Place a drip tray under the windshield washer fluid reservoir.

- Remove the windshield washer pump - 5 - out of the washer reservoir - 1 -.

- Disconnect the washer fluid lines - 3 - and - 6 - from the washer pump.

- Disconnect the electrical connector - 4 -.

Installing

Install in reverse order of removal, observing the following:

- Check the sealing grommet - 7 - for damage.

- Install the right front wheel housing liner..