Temperature Sensor (Gauge)

Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Preparations







- Release fasteners - 1 - and - 2 - and remove front noise insulation.







- Disconnect electrical connection - 1 - at sensor.

NOTE:
- Engine Coolant Temperature (ECT) Gauge Sensor G62 is accessible from lower right with engine installed.
- Engine shown removed for clarity.







Pin assignment for 2-pin connector at Engine Coolant Temperature (ECT) Gauge Sensor G62

1. Wiring from sensor to instrument cluster (temperature gauge)
2. Ground (GND) ( - )