Diagram 103/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Fuses, Coolant Fan Control (FC) Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

J271 - Motronic Engine Control Module (ECM) Power Supply Relay

J293 - Coolant Fan Control (FC) Control Module

J623 - Engine Control Module (ECM) Locations

S4 - Fuse in fuse holder/relay panel

S42 - Coolant Fan Fuse

S88 - Fuse Strip

T2p - Double Connector, on coolant fan control (FC) control module

T4y - 4-Pin Connector, black, in engine compartment

T6o - 6-Pin Connector, on coolant fan control (FC) control module

T10d - 10-Pin Connector, grey, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station electronics box, plenum chamber

T94 - 94-Pin Connector, black

V7 - Coolant Fan

(11) - Ground Connection (in battery box) Component Locations Overview in engine Compartment

(26) - Ground Connection (on front apron) Component Locations Overview in engine Compartment

(500) - Threaded Connection 1 - terminal 30 (on relay panel)

(A151) - Connection 4 (87) (in instrument panel wiring harness)

(D50) - Plus Connection (30) (in engine compartment wiring harness)

(D101) - Connection 1 (in engine compartment wiring harness)

* - Cooling Fan 1, 400W

** - 60A for radiator fan control 600W (where applicable, automatic transmission or trailer operation)

Next Diagram 103/3 (Tracks 15-28)