Oil Pump: Locations

Oil pump, lower section of oil pan, component overview





1 - 9 Nm
2 - Oil pan (lower section)
^ With Oil Level Thermal Sensor G266

3 - Side panel
^ For baffle box

4 - 9 Nm
5 - Oil pipe
6 - Gasket
^ Replace

7 - O-ring
^ Replace

8 - 9 Nm
9 - Baffle box
10 - 9 Nm
11 - Housing
^ For oil check valve

12 - Gasket
^ Replace

13 - Oil check valve
14 - O-ring
^ Replace

15 - Oil pipe
16 - 9 Nm
17 - Drive shaft for coolant pump
18 - Fitting sleeves
^ 2 pieces

19 - Oil pump
^ Do not disassemble
^ With relief valve approximately 5.5 bar

20 - Drive shaft for oil pump
21 - 8 Nm plus an additional 90° (1/4 turn)
^ Replace

22 - O-ring
^ Replace

23 - 9 Nm
24 - Gasket
^ Replace

25 - Housing for intake tube
26 - 9 Nm
27 - Oil strainer
^ Clean

28 - 9 Nm
29 - Intake tube
^ For oil pump

30 - 9 Nm
31 - Seal
^ Replace

32 - Oil drain plug, 25 Nm





Oil Level Thermal Sensor G266, removing and installing
1. Nut, 9 Nm
2. Sealing ring; replace
3. Electrical harness connector
4. Oil Level Thermal Sensor G266