Engine, Securing to Assembly Stand

Engine, securing to assembly stand

Special tools, testers and auxiliary items required





^ Lifting tackle 3033
^ Engine and transmission holder VAS 6095 with adapter set VAS 6095/1-6A
^ Shop crane VAS 6100

Special tools, testers and auxiliary items required





^ Lift arm extension for workshop crane VAS 6101

Work procedure





- Disconnect electrical harness connector at left engine mount - 1 -.
- Remove engine bracket nut - 2 - on left engine support.
- Remove engine bracket with left engine mount plate.
- Remove power-steering pump hydraulic line bolt - 1 - at engine support.





- Remove bolts - arrows - and remove engine support.





- Remove nuts - 1 to 6 - and remove left exhaust manifold.





- Remove wiring harness bracket at right engine mount plate - arrows -.





- Remove engine bracket nut - 1 - on right engine support.
- Remove engine bracket with right engine mount plate.

Note:
^ Ignore - 2 -.





- Remove bolts - arrows - and remove right engine mount.





- Remove nuts - 1 to 6 - and remove right exhaust manifold.





- Engage Lifting Tackle 3033 on engine lifting eyes and on Shop Crane VAS 6100 with Lift Arm Ext./Workshop Hoist VAS 6101 as shown in the illustration.
- Lift engine from support elements of scissor lift platform VAS 6131.





- Secure engine using Bracket VAS 6095/1-6A to Engine and Transmission Holder VAS 6095 as shown in illustration.