Engine, Securing to Engine and Transmission Holder

Engine, Securing to Engine and Transmission Holder

Special tools, testers and auxiliary items required

• Lifting Tackle (3033)

• Engine and Transmission Holder (VAS 6095) with Adapter Set (VAS 6095/1-6A)

• Shop Crane (VAS 6100)

• Lift Arm Extension for Workshop Crane (VAS 6101 )

Procedure

- Disconnect electrical harness connector at left engine mount - 1 -.





- Remove engine bracket nut - 2 - on left engine support.

- Remove engine bracket with left engine mount bracket.

- Remove power steering pump hydraulic line bolt - 1 - at engine support.





- Remove bolts - arrows - and remove engine support.

- Remove nuts - 1 to 6 - and remove left exhaust manifold.





- Remove wiring harness bracket at right engine mount bracket - arrow -.





- Remove engine bracket nut - 1 - on right engine support.





- Remove engine bracket with right engine mount bracket.

• Ignore - 2 -.

- Remove bolts - arrows - and remove right engine mount.





- Remove nuts - 1 to 6 - and remove right exhaust manifold.





- Engage Lifting Tackle (3033) on engine lifting eyes and on Shop Crane (VAS 6100) with Lift Arm Ext./Workshop Hoist (VAS 6101) as shown in the illustration.





- Lift engine from support elements of Scissor Lift Platform (VAS 6131 A).

- Secure engine using Bracket (VAS 6095/1-6A) to Engine and Transmission Holder (VAS 6095) as shown in illustration.