Air Cleaner Housing: Locations

Air Filter, Component Overview







1 - Bypass valve
2 - Bolt
- 1.5 Nm
3 - Air guide hose
- Check air duct hose for dirt and leaves
4 - Bolt
- 1.5 Nm
5 - Air duct
- To lock carrier
6 - Air duct
- Clipped into lower part of air filter housing
7 - Strainer
8 - Securing clip
9 - Spreader clip
10 - Bolt
- 1.5 Nm
11 - Air duct hose to Throttle Valve Control Module J338
12 - Mass air flow (MAF) sensor G70
13 - O-ring
14 - Bolt
1.5 Nm
15 - Upper part of air filter housing
- Clean air filter housing-upper part of salt residue, dirt and leaves
16 - Air filter element
- Always use a genuine air filter element
- Maintenance intervals
17 - Lower part of air filter housing
- Clean air filter housing-lower part of salt residue, dirt and leaves
- Using pressurized air, blow out the water drain (small hole) in the lower part of the air filter housing.
18 - Rubber grommet
19 - Vacuum hose