Body Control Module: Service and Repair

Comfort System Central Control Module

Removing

- Remove A-pillar trim:.

- Remove driver's seat.

• Safety belts at seat frame do not have to be unfastened.

- Fold back floor covering.

- Release cover for electronics box (driver's side) - arrows - and fold cover towards right.





- Release retaining clips - arrows - and remove Comfort System Central Control Module (J393) - 1 - from electronics box.





- Disconnect electrical connections - 2... 6 -.

• Refer to the applicable wiring diagram for exact identification of connections on electronics box => Wiring Diagrams.

Installing

Install in reverse order of removal, noting the following:

- Install A-pillar trim:.

- Install driver's seat.