Shift Lever and Shift Lever Bracket Assembly Overview

Shift Lever and Shift Lever Bracket Assembly Overview

• Lubricate mounting areas and slide surfaces with Grease (G 000 450 02).





1 Ball

2 Rubber ring

3 Ball guide

4 Rubber ring

5 Washer

• Collar faces toward ball guide => [ (Item 3) Ball guide ]

6 Securing ring

• Remove ball when removing

7 Spring

8 Spacer bushing

9 Washer

• Not installed on all versions

10 Securing ring

• Always replace

11 Noise insulation

• - Arrow - on noise insulation points in direction of travel

12 Shift lever knob

• With cover

• Removing and installing, refer to => [ Shift Knob with Cover ] Shift Knob With Cover

13 Nut - 8 Nm

14 Shift lever support

• Removing and installing, refer to => [ Selector Mechanism ] Selector Mechanism

15 Bolt, 6 Nm

16 Selector lever

• Offset faces toward rear

17 Bolt

18 Nut - 8 Nm

19 Shift housing

• Removing and installing, refer to => [ Selector Mechanism ] Selector Mechanism

20 Joint piece

• For selector rod/shift lever

21 Nut - 10 Nm

• Self-locking

• Replace

22 Bushing