Parking Aid Control Module

Parking Aid System

General Information

The optional parking aid system (also know as "Acoustic park assist" or "Parktronic(R)") is only available as a 4-channel system that monitors the area to the rear of the vehicle.

The system is activated automatically whenever the vehicle is shifted into reverse.

Before troubleshooting or servicing, technicians must be familiar with the functions and operation specifics of the parking aid system. Always read the owner's manual and review applicable system functions and operation limitations.
• Additional information:

=> Owner's Manual

=> Wiring Diagrams & Component Locations

Parking Aid Control Module

Removing

• Location: At left rear or luggage compartment below side trim/Tail lamp.

- Remove left luggage compartment side trim.

Sedan:

- Remove screws - arrows - and remove base mount - 1 -.





- Where applicable, disconnect electrical connections and antenna wiring at rear of Navigation Interface (R94) - 1 -.





• Disregard item - 2 -.

Avant:

- Remove screws - arrows - and remove base mount - 1 -.





All:

- Disconnect electrical connections - 2 - and - 3 -.





- Remove screws - arrows -.

- Remove Parking Aid Control Module (J446) - 1 -.

• Sedan installation is illustrated.

Installing

Install in reverse order of removal.

Tightening Specifications