Backrest Cover

Backrest Cover

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)





1 Right Backrest Cover

2 Left Backrest Cover

3 Retaining Clip

4 Bolt

• Tightening specification 2.5 Nm

• replace with locking compound

5 Outer Part of Belt Guide

• Removing and Installing, refer to => [ Outer Part of Belt Guide, Removing and Installing ]

6 Inner Part of Belt Guide

• with release lever

• The illustration shows the sedan version.

• To remove, remove backrest cover, refer to => [ Backrest Cover and Cushion ] Covers and Cushion, RS Front Sport Seats

• disassembling,

7 Backrest Frame

Backrest Cover, Removing and Installing





- Affix backrest panel all around trim - 1 - using adhesive tape - 2 -.

- Using pry lever (80-200), pry off upper backrest cover at inner side, starting from backrest panel.

- Disengage clip at front corner of backrest panel extremely carefully.

Outer Part of Belt Guide, Removing and Installing





- Carefully guide Pry Lever (80-200) between backrest cover and outer part of belt guide.

- Carefully press to disengage outer part of belt guide from inner part.