Rear Bench Seat

Rear Bench Seat





1 - Rear Bench Seat

• Removing

- Pull the rear seat bench - 1 - up and remove it - 1 -.

- With seat heater: disconnect the connector

• Installing

- Place the cover - 4 - under the belt latches - 3 - (Qty. 2).

- Install the molding on the cover for the safety belt latches. Refer to => [ Removing and Installing the Molding on the Belt Latch Cover ].

- With seat heater: connect the seat heater connector.

- Slide the rear seat bench - 1 - under the rear seat backrest - 2 - and guide the belt latches - 3 - (Qty. 2).

- Engage the rear seat bench - 1 - into the grommets - 5 - (Qty. 3).

2 - Rear Seat Backrest

3 - Belt Latches (Qty. 2)

4 - Cushion

5 - Grommets (Qty. 3)