Garage Door Opener Control Module, From 06.2006

Garage Door Opener Control Module, from 06.2006

Removing

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing





- Remove front interior/reading light. Refer to => [ Interior/Front Reading Lamp, from 06.2006 ].

- Carefully pry the diffusion lens - 1 - out of the socket - 2 - - arrow - using the Trim Removal Wedge (3409).

- Release the retaining clips - 3 - with a small screwdriver - arrows - and tilt the Garage Door Opener Control Module (E284) - item 1 - out of the interior/reading lamp - 2 -.





Installing

Install in reverse order of removal, observing the following:

- Press the interior/reading lamp lens on until it engages.

- Insert interior/reading light into roof cutout and clip.