Four-Way Lumbar Support Switch

Four-Way Lumbar Support Switch

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)





• Fixture for seat repair (VAS 6136)





• Removing





- Remove seat. Refer to => [ Standard Front Seat ] Standard Front Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove backrest adjustment wheel. Refer to => [ Backrest Adjusting Wheel ] Backrest Adjusting Wheel.

- Remove seat height adjustment handle. Refer to => [ Seat Height Adjustment Handle ] Seat Height Adjustment Handle.

- Remove side trim on sill side. Refer to => [ Side Trim, Sill Side ] Side Trim, Sill Side.

- Remove bolts - 2 - (Qty. 2).

- Remove four-way lumbar support switch - 1 -.

• Installing

To install, perform the steps used in removal in reverse order. When doing so, note the following:

• Tightening specifications for bolts - 2 -: 0.5 Nm

Drawer, through June 2006

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)





• Fixture for seat repair (VAS 6136)









1 Drawer

• Removing

- Remove seat. Refer to => [ Standard Front Seat ] Standard Front Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Pull handle - 2 - and pull out drawer - 1 -.

- Insert a screwdriver with inserted bit into opening - 5 - and remove the bolt installed beneath.

- Remove bolts - 4 - (Qty. 2).

- Remove screw - 3 -.

- Remove drawer - 1 -.

• Installing

- To install, perform the steps used in removal in reverse order.

2 Handle

3 Bolt

• 3.5 Nm

• Quantity: 2

4 Bolt

• 3.5 Nm

• Quantity: 2

5 Opening